- AQ Plus™
- Click here for AQ Plus Material Safety Data Sheet
(PDF)
-
This BOC
product is designed to clarify water and assist in the breakdown
of the organic binders which cause inorganic minerals to form
scaling. This formulation rapidly degrades the organic contaminants
which helps substantially reduce the requirements of harsh chemicals,
such as chlorine. Applications include pools, spas, ponds,
lakes, rivers, and eliminating scaling problems in water systems.
Dilution rates
vary with water conditions, with pool water use being at the level
of 1-2 ounces per 1000 gallons of water, once a week. Dosages may
be increased, based upon contaminant load factors.
back to list
- EcoSystem Plus™
- Click here for EcoSystem Plus Material Safety Data
Sheet (PDF)
-
-
This BOC product is for use in all wastewater applications, including
municipal and industrial wastewater facilities, agricultural and
animal waste lagoons, and other contaminated water systems.
-
-
Dilution rates are based upon the wastewater biological
oxygen demand (BOD) levels, with dosage amounts of EcoSystem Plus
being added at 1.0 parts per million (ppm) for every 100 BOD.
back to list
- NONTOX™
Click Here for Nontox Material Safety Data Sheet (PDF)
-
This BOC product is designed specifically for use in treating
hydrocarbon contamination in water and soil by enhancing their
biological breakdown and degradation to safe levels. One particular
benefit of this formulation is the rapid reduction of highly volatile
hydrocarbon components.
Dilution rates vary depending on whether contamination occurs
in soil or water. For soil, a mixture of 30 ounces of NONTOX™
added to 4 gallons of water, which is applied directly to the
soil, treats approximately 1 cubic yard of contaminated soil.
In water, the recommended dosage rate is 1 gallon of NONTOX™
mixed into 15 gallons of salt or fresh water, which will treat
approximately 10,000 square feet of an oil slick.
back to list
-
-
-
Click
Here for EcoCatalyst Spec Sheet (PDF)
This BOC product is designed to eliminate the
fats, oils and greases (FOGs) that clog pipes, drains, collection
and septic systems. Regular use of this formulation will keep
sewers, grease traps, drains, garbage disposals, wet wells,
pump stations, and septic systems free-flowing and odorless.
-
-
-
-
Dilution rates will vary depending upon the water
flow volumes and turbulence within the collection system. It
is possible to add EcoCatalyst™ at less than 1 ppm in cases
of high water flow volumes and turbulence, however, increased
dosages are recommended with lower water flow volumes. In cases
where drains or grease caps are present, EcoCatalyst™ should
be injected through a high pressure spray system, or injected
so that it takes advantage of the location’s hydrodynamics.
-
-
 |
click on picture for large version |
back to list
- MC 501™
- Click here for MC 501 Material Safety Data Sheet
(PDF)
-
This BOC
product is designed to effectively remove FOGs and other organic
contaminants from surfaces or within containers, replacing the
use of chemical solvents, caustics, and other dangerous chemicals
in most industrial and commercial applications of cleaning.
Dilution
rates vary from mixing 2 ounces of MC 501TM per 1 gallon of water
in general cleaning applications, up to 2 ounces of MC 501 per
100 gallons of water for use within high pressure water systems.
back to list
- PhytoZyme™
- Click here for PhytoZyme Material Safety Data Sheet
(PDF)
-
This BOC product is designed for use in agricultural
applications for soils, crops, turf and landscaping. These
benefits include improvement of moisture penetration and retention,
and increasing the soil’s ability to release nutrients by solubilization
and enhancement of microbial activity.
Dilution rates are based on applying approximately 1 gallon of
PhytoZyme™ for every 2,000 square feet of soil. Depending upon
soil conditions, PhytoZyme™ is applied every other month. In case
of heavy, less permeable clay type soils, multiple applications
are recommended.
back to list
- Eccomate™
- Click here for Eccomate Material Safety Data Sheet
(PDF)
-
This BOC product is designed for use in applications
where the elimination of odor is required. This is not a
masking agent, but quickly oxidizes odor causing molecules, thus
eliminating the source of odors.
Dilution rates vary upon the application, with a general recommendation
of 6 ounces of Eccomate added to one gal. of water for sprayed
on for most uses. This dilution is primarily for industrial and
commercial applications where odors are quite strong, lower dilution
levels are recommended for most residential uses.
back to list
- Packaging
-
The entire Bio-Organic Catalyst (BOC) line
of proprietary compositions are produced in a highly concentrated
liquid form. They are packaged in industry standard 1 gal.
jugs, 5 gal. pails and 55 gal. drums. Due to the documented
safety of these product formulations, they can all be shipped by
UPS or US Post Office.
back to top
Continue
Learning About Bio-Organic Catalyst:
|
