Omnex Control Systems / Phoenix Contact
A full partnership

To request additional information on any of these products, click here. Please be sure to mention which model(s) you are interested in.
HS-900 Cordless Wire for Sensors Back to top	HS-900 Features: 1 Watt Transmit Power Transmit One 4-20mA & Two Digital Signals Compact DIN-Rail Mounted Receiver Replicates One 4-20mA Output, Two Dry Contacts Easily Installed No Programming Required >15 Mile Transmit Range License-Free Operation Interference Free Operation Class 1, Div 2 CSA/NRTL US/FCC & ISC Approved
The HS-900 eliminates the need for cable and conduit systems by reliably carrying signals from sensors, switches, alarms, and PLC's to the control room. Each HS-900 leaves the factory with a unique address so that many HS-900 pairs can work independently in the same area without any interference. No programming or switch configuration is required. For data transmission over long distances and through high interference environments, the HS-900 is your trouble-free solution. Omnex Spread Spectrum Radios operate in the ISM (Industrial, Scientific and Medical) frequency band, therefore they do not require an FCC license. Omnex radios use "frequency hopping" technology, meaning signals avoid interference by not staying on the same frequency for very long. Omnex radios are a cost-effective and easy solution for data transmission. Contact Hydra-Numatic Sales for more information.
To request additional information on any of these products, click here. Please be sure to mention which model(s) you are interested in.
DS-900 Two-Way (Point to Point) Monitoring and Control Back to top	DS-900 Features: 1 Watt Transmit Power Transmit One 4-20mA & Two Digital Signals Compact DIN-Rail Mounted Transceiver and I/O Easily Installed No Programming Required Up to 8 Expandable I/O per Transceiver on Common Power and Communications Bus Maximum 33 Analog or 66 Discrete Signals in One Direction Dry-Contact LINK Output License-Free Operation Interference Free Operation Class 1, Div 2 CSA/NRTL US/FCC & ISC Approved
The DS-900 can move multiple points of discrete and analog updates back and forth between two locations. The user can "stack" different combinations of I/O for flexibility. To reliably transmit numerous signals through high interference environments inexpensively, use the DS-900 and its corresponding I/O modules. Omnex Spread Spectrum Radios operate in the ISM (Industrial, Scientific and Medical) frequency band, therefore they do not require an FCC license. Omnex radios use "frequency hopping" technology, meaning signals avoid interference by not staying on the same frequency for very long. Omnex radios are a cost-effective and easy solution for data transmission. Contact Hydra-Numatic Sales for more information.
To request additional information on any of these products, click here. Please be sure to mention which model(s) you are interested in.
DM-900 DIN Rail Mount RS232 Transceiver Back to top	DM-900 Features: 1 Watt Transmit Power Wide Range of Input Voltages Broad Temperature Range Assured and Broadcast Modes of Communication Auto-Routing in Repeater Networks ARQ and Error-Checking Capable of MASTER, SLAVE, or "Store-and-Forward" REPEATER SLAVE Modes DIN-Rail Mounted Easily Installed Dry-Contact LINK Output License-Free FHSS Interference Free Operation Class 1, Div 2 CSA/NRTL US/FCC & ISC Approved
The DM-900 is a wireless data radio designed for heavy interference environments where the most important factor is data integrity. The DM-900 can move serial data through situations where other radios fail. The DM-900 can assume the role of MASTER, SLAVE, or "Store-and-Forward" REPEATER SLAVE. It supports transparent data communications and Modbus RTU and Allen Bradley DF1 packet communications. Omnex Spread Spectrum Radios operate in the ISM (Industrial, Scientific and Medical) frequency band, therefore they do not require an FCC license. Omnex radios use "frequency hopping" technology, meaning signals avoid interference by not staying on the same frequency for very long. Omnex radios are a cost-effective and easy solution for data transmission. Contact Hydra-Numatic Sales for more information.
To request additional information on any of these products, click here. Please be sure to mention which model(s) you are interested in.
DX-900MA Wireless Terminal Blocks for PLC's Back to top	DX-900MA Features: 1 Watt Transmit Power 2-Way Communications Allen Bradley DF1 & Modbus RTU protocols 4 analog/digital inputs 4 digital outputs RS-232 & RS-485 serial ports 1,200 - 19,200 Baud Rates Up to 20 Mile Range I/O Expandable License-Free Operation Interference Free Operation Class 1, Div 2 CSA/NRTL US/FCC & ISC Approved
The DX-900MA integrated radio and I/O is a long range RF extension of a PLC's terminal block. Sensors and switches wire directly to the DX-900MA, elimination the need for cables and conduits. It effectively transmits analog and digital signals two-ways while it functions as a remote terminal block. The DX-900MA contains both Allen-Bradley DF1 and Modbus RTU protocols in its firmware. A PLC or PC can poll addressable remote DX-900MAs to read their inputs and write their outputs. Omnex Spread Spectrum Radios operate in the ISM (Industrial, Scientific and Medical) frequency band, therefore they do not require an FCC license. Omnex radios use "frequency hopping" technology, meaning signals avoid interference by not staying on the same frequency for very long. Omnex radios are a cost-effective and easy solution for data transmission. Contact Hydra-Numatic Sales for more information.
To request additional information on any of these products, click here. Please be sure to mention which model(s) you are interested in.
TEX/REX-900 One-Way Monitoring and Control Back to top	TEX/REX-900 Features: 2-4 Mile Transmit Range 250mW Transmit Power 3 I/O Terminal Block Options License-Free Operation Interference Free Operation Class 1, Div 2 CSA/NRTL US/FCC & ISC Approved
The TEX/REX-900 pair offers flexibility with multiple digital and analog points available on their terminal blocks. Remote devices, such as switches, alarms and sensors, are wired directly to the terminal block of the TEX-900 HopLink transmitter. The input signals to the TEX-900 are then transmitted to the REX-900 via a Spread Spectrum Frequency Hopping technique that updates 50 times every second and guarantees signal integrity with CRC-16 error checking. The REX-900 outputs the signals to relays, PLCs, and meters. Omnex Spread Spectrum Radios operate in the ISM (Industrial, Scientific and Medical) frequency band, therefore they do not require an FCC license. Omnex radios use "frequency hopping" technology, meaning signals avoid interference by not staying on the same frequency for very long. Omnex radios are a cost-effective and easy solution for data transmission. Contact Hydra-Numatic Sales for more information.
To request additional information on any of these products, click here. Please be sure to mention which model(s) you are interested in.

Back to the home page