OmniSite

The OmniSite Viper Lift Station Monitoring Panel provides the capability to monitor remotely located sewage lift stations without dedicated telephone lines or proprietary radio systems. Your connected lift station is completely monitored over the Internet using just a web browser, so there is no software to buy. If an abnormal condition occurs, notifications are sent by e-mail, pager, or voice call to any location.

Viper Dialer Features:

• Microprocessor based alarm monitor
• Report daily runtime and on/off cycles up to 3 pumps
• Report pump draw-down and refill times per cycle
• Analyze pump operation before failures occur
• Calculate total station flow without a flow meter

Specifications

• Power 12 VDC or 120 VAC
• Communications: Cellular WINGS 900MHz
• Inputs: (10) Universal Inputs accept 12
• VAC/VDC - 120 VAC/VDC
• Access Key: Smart security key to identify personnel on site
• Terminal Blks: Accepts #14-18 AWG solid or stranded wire
• Operating Temp.: -40/140 Deg F
• Operating Humidity:10-98% RH Non-condensing
• Certification: UL Pending
• Dimensions: 12H x 10W x 4D
• Memory Stick: 32Mb- 1 Gb user selectable
• LCD Display: Backlit 2 x 16
• Keypad: (4) universal navigation buttons

The OmniSite SmarteLight is the perfect solution for smaller pumping stations. The Smartelight is a new patented product which notifies you via email, text message, or voice call whenever you lose power to your pumping station or your alarm light is illuminated. This simple device can be installed in a few minutes. Once installed, the SmarteLight works like all other quality OmniSite products, providing alarm history and configuration ability from the OmniSite GuardDog interface.

SmarteLight Features:

• Single alarm channel input
• Single low voltage control output - turns things on/off from your phone or the Internet
• Battery backup - be notified of power failures and events when power is lost
• Rugged design for indoor or outdoor use
• 12VDC or 120VAC operation
• Complete U.S.A. coverage
• Easily replace your existing alarm light today!

Specifications

• Single Input Alarm Channel: 12VAC/VDC to 120VAC/VDC, Opto-isolated to 4000VAC
• Single Output Channel: Form C relay, 120VAC @ 1A max
• Optional Battery Backup: Internal 6VDC, non-rechargeable Lithium battery, will provide at least two years of service assuming 24 power losses per year
• Operating Temperature: -20 to 150 deg F
• Operating Humidity: 0-90% RH, non-condensing
• Radio: Quad Band GSM cellular transceiver 850/900/1800/1900, -10dB sensitivity (typcial), Class 4 (2W @ 850/900 MHZ), Class 1 (1W @ 1800/1900 MHZ)
• Antenna: internal mount, unity gain, 1/4 wave omni-directional stubby-style
• Input Power: 120VAC +/- 20% @ .5A max or 12VDC +/- 15% @ 2A max
• Enclosure: NEMA 4 equivalent rating for direct mounting indoors or outdoors.
• Dimensions: 4"W round base x 5"H
• Weight: 1 lb
• Certification: UL Pending